3.9.2 Lab: Boot the Computer

Introduction


Print and complete this lab.

In this lab, you will boot the computer for the first time, explore the BIOS setup program, and change the boot order sequence.


Recommended Equipment

• Assembled computer without an operating system installed
  Motherboard manual
  

Step 1

Plug the power supply cable into an AC wall outlet.

Turn on the computer.

NOTE: If the computer beeps more than once, or if the power does not come on, notify your instructor.

Step 2

During POST, press the BIOS setup key or key combination.
The BIOS setup program screen will appear.

What is the key or combination of keys used to enter the BIOS setup program?

• Delete Key or Del

Who manufactures the BIOS for your computer?

• Ambios 0314

What is the BIOS version?

• 0314 Bios Version
  

What menu options are available?

• Main Advance Power Boot Exit
  

Step 3

Navigate through each screen to find the boot order sequence.

What is the first boot device in the boot order sequence?

• cd-rom or optical drive
  

How many additional devices can be assigned in the boot order sequence?

• 3 additional device
  

Step 4

Ensure that the first boot order device is the optical drive.
Ensure that the second boot order device is the hard disk drive.

Why would you change the first boot device to the optical drive?

• so that that the optical drive has a device it will boot first
  

What happens when the computer boots and the optical drive does not contain bootable media?

• it will continue to load in windows
  

Step 5

Navigate through each screen to find the power management setup screen, or ACPI screen.

What power management settings are available?

• Suspend mode, ACPI 2-0 support
  

Step 6

Navigate through each screen to find the PnP settings.

What PnP settings are available?

• plug and play as installed
• DMA 1 used
• slot 1 IRQ
• DMA 3 used by isa
• slot 3 audio IRQ
• ISA mem block base
• PCI latency timer
• IRQ 3 used by ISA
• IRQ11
• IRQ12
• IRQ13
• IRQ14
• IRQ15
  

Step 7

Save the new BIOS settings and exit the BIOS setup program.

Step 8

The computer will restart.
An operating system can be installed at this time.